Facade trim
Horizontal plank cladding system
VANKKA Plank
Horizontal lines with a controlled shadow gap.
- Code
- VPL
- Fixing
- Concealed fixing
- Category
- Wall & Facade Systems
Profile cross-section — schematic, not to scale
Overview
VANKKA Plank runs the elevation horizontally. Each plank interlocks with the one below and is secret-fixed through the upstand, leaving a defined shadow gap along every course rather than a visible lap.
That shadow is what separates a considered facade from a clad shed. Because the joint is formed by the profile rather than by how carefully the installer overlapped the last sheet, it stays constant across the whole elevation.
Planks are supplied in project lengths to keep vertical joints off principal elevations, and the system carries around corners with formed trims rather than a butt joint and a bead of sealant.
Applications
- Residential and multi-residential facades
- Commercial entrances and podiums
- Soffits and undercrofts
- Extensions and refurbishment
01
Defined shadow joint
The reveal is formed by the profile, so it is identical on every course.
02
Secret fixed
Fasteners are covered by the following plank — nothing shows on the face.
03
Project lengths
Supplied to suit the elevation so vertical joints can be positioned deliberately.
Technical data
Specifications
All VANKKA data is metric. Values are confirmed for your project at quotation and issued with the technical documentation.
Verified technical data for this product is being finalised. The data sheet structure below shows exactly what will be published — request the full technical documentation and our team will send the current figures for your project.
Geometry
Material
Coating
Performance
Warranty & compliance
Finishes
Coating systems and colours
Coating choice is driven by exposure and expected service life rather than by colour. Both are confirmed with your quotation.
Matt Polyester
MPLow gloss, low reflection, contemporary.
Polyurethane
PURBuilt for the Nordic envelope.
PVDF / Fluoropolymer
PVDFMaximum colour stability.
Colours available in these coating systems
Pure White
RAL 9010
Grey White
RAL 9002
Light Grey
RAL 7035
Grey Aluminium
RAL 9007
Iron Grey
RAL 7011
Graphite Grey
RAL 7024
Anthracite Grey
RAL 7016
Jet Black
RAL 9005
Light Ivory
RAL 1015
Clay Brown
RAL 8003
Copper Brown
RAL 8004
Chocolate Brown
RAL 8017
Oxide Red
RAL 3009
Brown Red
RAL 3011
Wine Red
RAL 3005
Moss Green
RAL 6005
Chrome Green
RAL 6020
Fir Green
RAL 6009
Gentian Blue
RAL 5010
Steel Blue
RAL 5011
Slate Blue
RAL 5008
Silver Metallic
RAL 9006
Graphite Metallic
RAL 9023
On-screen colours are approximations. Coated steel changes appearance with gloss level, surface texture, viewing angle and daylight. Always confirm a colour against a physical VANKKA sample before ordering.
Documentation
Everything you need to specify it.
Data sheets, installation guides, CAD details, declarations of performance and warranty terms. Documents not yet published can be requested directly and will be sent by the technical team.
- RequestTechnical data sheet
Technical data sheet
Data sheetPDF
- RequestInstallation guide
Installation guide
Installation guidePDF
- RequestCAD profile and details
CAD profile and details
CAD filesDWG / DXF
- RequestDeclaration of performance
Declaration of performance
Declaration of performancePDF
- RequestWarranty terms
Warranty terms
WarrantyPDF
Gallery
VANKKA Plank in use
Photography of this product in production and on completed buildings.
VANKKA Plank on a completed building
VANKKA Plank profile detail, raking light
VANKKA Plank in production on the roll-forming line
VANKKA Plank installed — junction and trim detail
Completes the system
Trims and accessories designed for this product
Ordered with the profile, these come from the same coil and the same batch — so they match exactly.
